排序方式： 共有40条查询结果，搜索用时 46 毫秒
1.
人工林软质木材表面密实化新技术 总被引：16，自引：7，他引：16
采用一种新型木材改性处理剂，分别以改性异氰酸酯浓度5％、10％、15％、20％，对美国人工林火炬松（Pinus taeda）进行表面密实化处理。结果表明，随着树脂浓度的增加，无论是冷水浸泡还是煮沸，木材的吸水厚度膨胀率和压缩变形恢复率明显降低。表面密实化后，火炬松处理材的MOR和MOE值分别比素材提高43．9％和30．1％；水浸24h和煮沸2h后的湿状抗弯性能比素材略低，干状抗弯性能明显比素材高，MOR分别高28．0％和25．76％；MOE分别高22．55％和27．79％。改性异氰酸酯浸渍处理后的表面密实化木材，具有一定的阻燃效果；表面耐磨耗性能和表面硬度亦明显改善。 相似文献
2.
酚醛树脂对人工林杉木木材的浸注性及其改善的研究 总被引：15，自引：1，他引：15
研究了低分子量酚醛树脂对杉木木材的浸注性及树脂在木材内的分布状态，并对苯醇抽提前处理法、常压浸渍和真空浸注的效果进行了评价。无论抽提处理与否，常压浸渍的树脂水溶液充填率为理论最大浸注量的10％左右，而真空浸注可达到90％以上，真空浸注效果明显；无论是常压浸渍还是真空浸注，抽提处理后树脂的浸注性有很大改善，但常压浸渍的效果不是非常明显。软X射线解析样品纵向树脂分布状态结果表明：无论是否经过抽提处理，在常压浸渍的情况下，树脂主要分布在样品的端部，而经过真空浸注处理，树脂注入的深度增加，尤其经过抽提处理后树脂可达到样品中心。由此可见，抽提处理和真空浸注并用，使树脂的分布状态有很大改善。另外，抽提处理后样品之间树脂分布的差异也趋于减小，即树脂在样品间的分布状态也有改善。用实体显微镜观察树脂在木材细胞腔内的充填状况结果表明：沿着样品纵向从端部到中心树脂充填率呈下降趋势，而且抽提处理的充填率比未抽提处理的高。 相似文献
3.
Morten Eikenes Gry Alfredsen Bjørn Erik Christensen Holger Militz Halvor Solheim 《Journal of Wood Science》2005,51(4):387-394
Fungi cause serious problems in wood utilization, and environmentally benign wood protection is required as an alternative to traditional chemicals. Chitosan has shown promising antimicrobial properties against several microorganisms. In this study, we present the characterization of and antifungal properties of a commercial chitosan formulation developed for impregnation of wood. A broad range of chemical and mycological methods were used to evaluate the uptake, fixation, and antifungal properties of chitosan for wood preservation. The results show that the higher the uptake of chitosan the lower the relative recovery of chitosan in wood after leaching, and the higher the molecular weight of chitosan the higher the recovery. Chitosan with high molecular weight proved to be more efficient against decay fungi than chitosan with low molecular weight. The fungi tested on chitosan-amended nutrient agar medium were totally inhibited at 1% (w/v) concentration. In decay studies using small wood blocks, 4.8% (w/v) chitosan concentration gave the best protection against brown rot fungi. 相似文献
4.
以脲醛树脂作为浸渍剂,纳米SiO_2作为改性材料对速生桉木进行改性处理,以纳米SiO_2质量与脲醛树脂浸渍溶液固含量的质量比(W)、高温处理温度(H)和时间(T)作为影响因素,探究浸渍高温热处理改性对速生桉木力学性能的影响。研究结果表明:浸渍高温热处理能够提高桉木的握钉力、抗弯强度和抗弯弹性模量。当W为2%、H为180℃、T为4 h时,浸渍热处理桉木的径面和弦面握钉力达到了理想值;当W为1%、H为160℃、T为4 h时,浸渍热处理桉木的端面握钉力较为理想;当W为1%,H为160℃、T为2 h时,浸渍热处理桉木具有较好的抗弯强度和抗弯弹性模量。 相似文献
5.
Junji Matsumura Rudolf E. Booker Bradley G. Ridoutt Lloyd A. Donaldson Naoto Mikajiri Hiroshi Matsunaga Kazuyuki Oda 《Journal of Wood Science》1999,45(6):456-462
Radiata pine sapwood and heartwood were dried using high-temperature, conventional-temperature, and air drying schedules with and without pre-steaming. They were then impregnated by vacuum treatment with double-distilled water, toluidine blue, and fluorescein dye. For sapwood, there were only minor differences in uptake between drying methods and when pre-steaming was used. Using microscopy, the primary flow pathways in sapwood were found to be the resin canal network and ray parenchyma cells, which provided conduction without large resistance. In heartwood, uptake was strongly influenced by pre-steaming the green lumber. After pre-steaming heart-wood, there was an increase in uptake from all surfaces but especially from the radial surfaces. Lower extractive contents, disruption of epithelial and ray parenchyma cells, and alteration of the condition of bordered pits were also associated with pre-steaming. It was therefore possible to classify flow paths in radiata pine heartwood five ways, according to uptake values and wood anatomical features.This research was presented in part at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998. 相似文献
6.
Wood modification, of which thermal modification is one of the best-known methods, offers possible improvement in wood properties without imposing undue strain on the environment. This study investigates improvement of the properties of heat-treated solid wood. Scots pine (Pinus sylvestris) was modified in two stages: impregnation with modifiers followed by heat treatment at different temperatures. The impregnation was done with water glass, melamine, silicone, and tall oil. The heat treatment was performed at the temperatures of 180°C and 212°C for three hours. The modified samples were analyzed using performance indicators and scanning electron microscope micrographs. The mechanical and physical properties were determined with water absorption, swelling, bending strength, and impact strength tests. All the modifiers penetrated better into sapwood than hardwood; however, there were significant differences in the impregnation behavior of the modifiers. As regards the effect of heat treatment, generally the moisture properties were improved and mechanical strengths impaired with increasing treatment temperature. In contrast to previous studies, the bending strength increased after melamine impregnation and mild heat treatment. It is concluded that the properties of impregnated wood can be enhanced by moderate heat treatment. 相似文献
7.
为了筛选大型运输容器减震器用木材,对泡桐、柳杉、杨木、落叶松、杉木等多种人工林木材进行了大变形抗压测试及减震性能分析。结果表明:仅密度达0.4 g/cm3的杉木,能满足大型运输容器减震材料要求,其资源极其有限;通过对低密度人工林杉木进行树脂浸渍增强改性,提高其减震性能,使其能满足大型运输容器减震材料要求,从而可充分利用人工林杉木资源。 相似文献
8.
9.
三聚氰胺改性脲醛树脂浸渍预油漆纸的耐潮湿性能 总被引：2，自引：0，他引：2
针对预油漆纸易受潮吸湿的问题 ,本文以三聚氰胺与尿素、甲醛共聚的改性浸渍树脂为对象 ,研究经过树脂浸渍后 ,预油漆纸的耐潮性能及影响因素。通过对浸渍纸恒温恒湿处理和定时观测 ,发现树脂中三聚氰胺与尿素的重量比为 1∶5时 ,耐潮性能显著提高 ;纸中浸胶量为 30 %和 5 0 %时 ,纸张的吸湿过程不同 ,高浸胶量的纸吸湿速度快 ;在不同的环境湿度下 ,浸渍纸的吸湿率随湿度提高而增加。文中还探讨了预油漆纸在不同湿度环境中的使用和储存对策 相似文献
10.
Keiko Sakai Masahiro Matsunaga Kazuya Minato Fumiaki Nakatsubo 《Journal of Wood Science》1999,45(3):227-232
The impregnation of various simple phenolic and natural polycyclic compounds into wood was investigated from the viewpoints of vibrational property and dimensional stabilizing effect. When simple phenolic compounds were impregnated, the loss tangent (tan ) in the longitudinal direction increased linearly with increasing weight gain. Meanwhile, among the natural polycyclic compounds hematoxylin decreased the tan drastically by impregnation. It was suggested that the five hydroxyl groups and the pyran ring oxygen in the hematoxylin molecule contribute to formation of the crosslinkage-type hydrogen bonds between wood components. The rigidity of hematoxylin molecules may also be important. By impregnation of about 10% catechol, resorcinol, and saligenin, a 40% level of antiswelling efficiency (ASE) was attained, although a significant dimensional stabilizing effect was not observed after impregnation of natural polycyclic compounds.Part of this work has been published as a Rapid Communication inMokuzai Gakkaishi 43(12). It was also presented at the 48th annual meeting of the Japan Wood Research Society, Shizuoka, April 1998 相似文献