Anoda cristata control with glyphosate in narrow- and wide-row soyabean     

E Puricelli  D Faccini  G Orioli†  & M R Sabbatini† 《Weed Research》2004,44(3):150-156

Experiments evaluated the effect of glyphosate rate and Anoda cristata density, on crop and weed biomass and weed seed production in wide (70 cm) and narrow rows (35 cm) glyphosate‐resistant soyabean (Glycine max). Soyabean density was higher at 35 cm row spacing as an increase in planting rate in narrow‐row soyabean is recommended for producers in Argentina. Soyabean biomass at growth stage V4 (four nodes on the main stem with fully developed leaves beginning with the unifoliate leaves) was higher when grown on narrow than in wide‐rows but was not affected by the presence of A. cristata. At growth stage R5 (seed initiation – seed 3 mm long in a pod at one of the four uppermost nodes on the main stem, with a fully developed leaf and full canopy development), crop biomass was greater in narrow rows compared with wide rows with 12 plants m^?2 of A. cristata. In narrow‐row soyabean, a single application of a reduced rate of glyphosate maintained soyabean biomass at R5 and provided excellent weed control regardless of weed density. In wide‐row soyabean control was reduced at the high weed density. Regardless of row spacing, A. cristata biomass and seed production were severely reduced by half of the recommended dose rate of glyphosate but the relationship between biomass and seed production was not altered. Glyphosate rates as low as 67.5 g a.e. ha^?1 in narrow rows or 540 g a.e. ha^?1 in wide rows provided excellent control of A. cristata. To minimize glyphosate use, planting narrow‐row soyabean are effective where A. cristata density is low.  相似文献   

Density responses and spatial distribution of cotton yield and yield components in jujube (Zizyphus jujube)/cotton (Gossypium hirsutum) agroforestry     

《European Journal of Agronomy》2016

Trees are the dominant species in agroforestry systems, profoundly affecting the performance of understory crops. Proximity to trees is a key factor in crop performance, but rather little information is available on the spatial distribution of yield and yield components of crop species under the influence of trees in agroforestry systems. Also, little information is available on how crop density may be exploited to optimize the yield in such systems. Here we studied the performance of cotton in jujube/cotton agroforestry. Field experiments were conducted in 2012 and 2013 in Hetian, Xinjiang, China. Cotton was grown at a row distance of 60 cm in three densities, 13.5, 18.0 and 22.5 plants m⁻² in six m wide paths between tree lines in a jujube plantation. Plant density affected both cotton aboveground dry matter and yield significantly. The highest yield was attained at the intermediate density of 18.0 plants m⁻² (20.0 plants m⁻² corresponding in sole cotton), lower than the optimal density in sole cotton (25.0 plants m⁻²). Yield at the lower density was constrained by the low number of bolls per m² as a direct consequence of the low density, whereas at the high plant density yield was constrained by a lower allocation of assimilates to cotton seed and lint, as a consequence of intraspecific and interspecific competitions. There were strong gradients in yield and yield components in relation to the distance from the tree rows. Leaf area and total dry matter of cotton in rows close to the tree lines were reduced, especially in the rows next to the trees. Moreover, biomass allocation to cotton fruits was reduced in these rows. Competitive influences from the trees on cotton performance extended two rows deep in a six-year old jujube stand, and even three rows deep in a seven-year old stand. Shading effects on cotton yield were compensated by increasing plant density as a result of greater boll numbers per unit ground area. Data from this study help guide the design of optimal plant density of cotton in jujube plantations and give insight in the spatial distribution and dynamics of competitive effects in agroforestry systems in general.  相似文献   

行距对马铃薯农艺性状及产量的影响     

高幼华  金光辉  刘喜才  尤晗  李雅南  孙少慧 《黑龙江八一农垦大学学报》2016,(5):14-18

试验采用随机区组试验设计,大垄双行,整薯播种。在同一密度下对不同行距间的各指标进行比较及单因素方差分析。旨在为马铃薯生产和机械化作业提供理论依据。结果表明:在12株·m~(-2)和9株·m~(-2)的种植密度下,主茎数、结薯数、产量都是随行距的增加而呈现递减的变化趋势;在7.2株·m~(-2)的种植密度下,主茎数、结薯数、产量是随行距的增加而呈现"增-减-增"的变化趋势;同一密度下,淀粉含量随行距增加变化不明显,大部分维持在15%~16%之间。总体来看,同一密度下不同行距间对主茎数、结薯数、产量及淀粉含量的影响均差异不显著。  相似文献   

南方双季稻区小行距插秧机的改进设计与试验     

陈立才  黄芳  李艳大  舒时富  江向荣  贺捷  王水发  尹国庆 《农机化研究》2016,(12):183-187,192

针对300mm行距插秧机在南方双季稻区栽插行距过大、穴数过少及不能充分发挥机插稻的增产潜力问题,在300mm行距插秧机结构的基础上,通过机械优化设计和田间农艺技术相结合的方法,对其插植部箱体、苗箱、支架(包括左右支架和中间支架)和浮板4个关键部位技术参数改进设计,研制出了适合南方双季稻区作业的2ZS-488B型(264mm行距)插秧机,并于2012-2013年在江西省2个试验点进行不同早晚稻品种机插行距的大田对比试验。结果表明:该插秧机作业性能稳定,漂秧率、伤秧率和漏插率分别为1.55%、2.68%和1.93%,相对均匀度合格率为89.54%。与300mm行距插秧机相比,其产量平均增产529.43kg/hm2,平均增产率达8.57%。该研究结果创新了南方双季稻区新的机械化栽插方式,有利于农机农艺的有效融合。  相似文献   

走系统工程之路加快玉米联合收获发展步伐     

李其昀  贾晓东 《农机化研究》2006,(10):8-10

对玉米联合收获机推广应用较多的山东、山西及河北等省的玉米联合收获机试验情况进行了研究分析．其结果表明，影响玉米联合收获机推广的诸多因素中，最为关键的因素就是行距的适应性问题。为此，结合小麦联合收获机推广经验，指出了加快玉米联合收获机推广应用速度的关键是实现玉米生产过程机械化，而在小麦玉米一年两熟地区则要从小麦的种植规格入手，即实现小麦玉米全过程的机械化；并将系统工程的方法运用于种植收获的全过程，真正实现优质与高效的现代化农业生产。  相似文献   

不同种植密度和行距配置对香蕉产量 及品质的影响     

黄丽娜  程世敏  赵增贤  魏军亚  魏守兴 《中国果业信息》2024,53(1)

为确定香蕉适宜机械化操作的种植密度和行距配置,采用裂区试验设计,以种植密度（P）（P1：2190株/公顷、P2：2340株/公顷、P3：2520株/公顷）为主区,行距（R）[ R1：（宽行5.10米+窄行1.00米）、R2：（宽行4.80米+窄行1.30米）、R3：（宽行4.50米+窄行1.60米））]为裂区,探讨不同种植密度和行距配置对香蕉农艺性状、产量及品质的影响。结果表明：R能显著影响香蕉株高和茎围,P和R对香蕉单产、总产量均有显著影响,P1、P2香蕉单产较P3分别显著提高10.29%、10.88%,P2总产量较P1显著提高6.62%;R3单产、总产量最高,R1单产、总产量最低。分析产量构成可知,R3能提高香蕉商品蕉采收率;P1、P2单果重较P3显著提高,R3单果重较R1、R2 分别显著提高21.23%、4.44%。P1果指长较P3显著提高,R2、R3间果指长、果指围显著高于R1。P和R对果实可溶性固形物均无显著影响。P3可滴定酸含量较P1、P2显著提高,P1、P2维生素C含分别较P3显著提高19.38%、15.78%;R3较R1显著提高维生素C含量8.77%。综上所述,宝岛蕉品种种植密度为2340株/公顷,宽行4.5m、窄行1.6m时,香蕉农艺性状、产量、商品蕉采收率、单果重、可溶性固形物及维生素C含量最高,试验结果为今后宜机化栽培的香蕉种植密度和行距的配置提供依据。  相似文献   

不同行距配比对玉米光合生理指标及茎秆特性的影响   总被引：2，自引：2，他引：0  

常海霞  郭红亮  刘永忠  李万星  曹晋军  靳鲲鹏  李丹 《中国农学通报》2020,36(17):16-20

以‘大丰30’为试验材料,在同一密度下（75000株/hm²）设置5种不同行距配比,研究不同行距配比对玉米光合生理指标及茎秆力学特性的影响。结果表明：行距配比为40 cm×80 cm时,棒三叶的叶绿素含量(SPAD)在灌浆期达到峰值;行距配比为30 cm×90 cm时,棒三叶净光合速率在灌浆期最高。大口期开始,行距配比为40 cm×80 cm时,叶面积指数(LAI)最高。单株干物质积累量以40 cm×80 cm最高。各行距配比的茎秆硬皮穿刺强度与茎秆弯曲性能随着节位的下降均呈逐渐增强的趋势,从大到小为 40 cm×80 cm>50 cm×70 cm>30 cm×90 cm>60 cm×60 cm>20 cm×100 cm。穗长、穗粗、千粒重和穗粒数各处理间均有不同变化,行距配比为40 cm×80 cm时产量最高,比等行距60 cm×60 cm增产7.96%。由此可见,行距配比为40 cm×80 cm,有利于大穗型品种‘大丰30’的光合性能和茎秆强度的提高,从而达到抗倒伏增产的目的。  相似文献   

双斜盘多排式轴向柱塞马达转矩特性分析     

闻德生  孙立杰  席冰  杜飞  李德雄  赵国强 《农业机械学报》2020,51(6):420-426

为了实现多级转速和转矩的输出,轴向柱塞马达必须使用节流阀、减压阀等耗能元件来改变输入压力和流量,但同时降低了效率。新型双斜盘多排式轴向柱塞马达可以利用其结构的特殊性,实现输出转矩的多样性。本文基于双斜盘多排式轴向柱塞马达的结构特点及工作原理,推导了该马达在不同工作方式下的理论瞬时转矩和转矩不均匀系数,并通过Matlab分析了内外马达转矩系数比对转矩不均匀系数的影响,设计了马达的实验液压系统并搭建了实验平台,对马达进行了原理性实验,并进行了数据分析。实验结果表明,在额定压力和额定排量下,该马达能实现多种不同的转速与转矩输出,随着内外马达转矩系数比的增大,低速大转矩的转矩不均匀系数越小,高速低转矩不稳定系数越大,通过合理设计可以实现马达在不同工作状态下的稳定运行,验证了新型马达在结构原理上的可行性,为新型轴向柱塞马达的改进设计提供了实验依据。  相似文献   

株行配置对春玉米根冠空间分布及产量的影响   总被引：3，自引：0，他引：3  

梁熠  何文寿  代晓华  马琨  侯贤清 《玉米科学》2016,24(6):97-102

以先玉335为试验材料,设置7.50万株/hm2和9.75万株/hm2两个种植密度,60 cm+60 cm等行距和40 cm+80 cm宽窄行两个行距配置,比较株行配置对春玉米冠层、根系结构与功能及产量的影响。结果表明,随种植密度增加,果穗、茎鞘干重百分比垂直分布明显上移,叶片干重百分比在垂直分布变化较小,行距配置对果穗、茎鞘干重百分比在垂直分布上影响较小。相对于等行距种植,宽窄行种植叶片干重百分比有下移趋势,群体不同叶位叶面积指数也表现为同一密度下,宽窄行种植群体上层LAI较小,穗位叶高效叶层LAI较大;随密度增加,根重有纵向下移的趋势,根系TTC还原强度在不同土层深度都显著降低。同一密度下,宽窄行种植根重的垂直分布出现下移趋势,根系TTC还原强度略高于等行距种植。高密度条件下,宽窄行种植降低了玉米果穗秃尖长,显著增加果穗穗粒数,因而显著提高产量,增产2.73%~10.86%,说明在宁夏扬黄灌区较高种植密度下,采用宽窄行种植能优化不同叶层结构,适当增加深层土壤根系所占比例及活力,有利于获得高产。  相似文献   

寒地水稻缩垄增行合理密植     

王永军  王文强  王乐宝 《北方水稻》2003,(4):21-22

分析了寒地水稻生产中,单位面积穴数不足、均度不够、产量低的主要原因是普通人工插秧行距偏大、穴距过大。论证了缩垄增行是解决这一问题的主要技术措施,其机械行距为24cm,人工插秧实行(19+35cm)的宽窄行。指出在一定范围内,保证群体密度,田间分布均匀是保证质量、提高产量的关键。  相似文献