共查询到20条相似文献,搜索用时 985 毫秒
1.
张云鹤杨铁马岩任长清张亚新 《林产工业》2015,(8):42-46
对数控往复式剖分锯进行简要介绍,通过对剖分锯主机工作过程的分析,确定剖分锯主机结构的布局方案,并利用solidWorks软件对剖分锯主机进行三维建模,完成剖分锯主机机架、主锯组件、划线锯组件、主划线锯升降机构及驱动总成的结构设计和切削力、切削功率等主参数的设计计算。该设计使剖分锯主机结构紧凑,调整方便,加工效率和加工精度高,大大提高了往复式剖分锯的工作性能。 相似文献
2.
3.
针对地板生产设备大多数处于半自动化状态,且存在着加工精度和加工效率不高等缺陷,提出了强化地板数控横向开榫机主机结构的设计。通过对横向开榫机加工工艺分析,利用三维软件solirlworks对强化地板数控横向开榫机主机结构进行实体建模,确定了强化地板数控横向开榫机主机总体结构,并对齐边锯、粗铣的切削力和切削功率进行设计计算,完成了强化地板数控横向开榫机粗铣主轴件、齐边锯组件、精铣主轴件、抛光主轴组件、主机机架等结构的设计研究。设计的强化地板数控横向开榫机主轴结构简单,具有强度高、加工效率高、稳定性较好、制造成本低的优点。 相似文献
4.
5.
通过对数控曲线带锯机的锯切方式进行分析,最终选取带锯条的工作边绕锯齿连线摆动,同时对工件固定在工作台上做X向和Y向移动的曲线锯切形式进行讨论分析。根据这种类型曲线锯切方式的数控曲线带锯机加工曲线的工作原理,研究了数控曲线带锯机加工木材时锯条的受力状态和曲线锯路形成的过程,着重分析了带锯机曲线锯切时锯路的宽度和最小锯切半径。经过分析,总结得出数控曲线带锯机形成曲线轨迹的基本原理,基于该基本原理计算整理得到锯路宽度的估算公式及最小锯切半径的极限公式,为数控曲线带锯机加工曲线时确定其加工范围和理论出材率提供理论依据。 相似文献
6.
针对传统板材锯切设备大多数处于半自动化状态,且存在加工精度低、出材率低、安全性差等缺点,笔者提出一种用于毛边板材裁边的纵剖优选锯设备的主轴调整系统。通过对毛边板材的裁边工艺进行分析,利用三维软件对纵剖优选锯主轴调整系统结构进行实体建模,确定了纵剖优选锯主轴调整系统的总体结构。对主轴组件上的锯片切削力和切削功率进行详细的设计计算,完成了主轴调整系统的主轴组件、锯片调整组件等结构的设计研究。根据锯片滑台最大许用应力和最大变形量对其进行有限元静力学仿真分析,通过仿真结果校核得出的锯片滑台满足设计要求。设计的纵剖优选锯主轴调整系统结构具有适用于产品多规格、高出材率、高自动化和实用性强的特点。 相似文献
7.
8.
由于国内门窗窗型加工设备大多处于半自动化状态,更多依赖于国外进口设备,且存在着加工效率不高、精度低等缺陷,因此提出了门窗材双端刨铣自动换刀加工中心的设计。通过对门窗材双端端头铣型加工工艺分析,完成门窗材双端刨铣自动换刀加工中心结构总体布局,利用Solidworks软件对加工中心端头铣削结构进行实体建模,确定了加工中心端头铣削结构主机总体结构,并对齐头锯、端头粗铣铣削主轴的切削力和切削功率进行设计计算,得到主锯电机功率7.5 k W、铣削主轴铣削电机功率为7.5 k W,符合加工功率要求,并完成齐头锯组件、粗铣主轴组件、精铣主轴组件、榫头铣座送料结构、刀具位置调整机构、主机机架等结构的设计以及外购件的选型,最后运用ANSYS对粗铣铣削主轴进行静力学分析,得到主轴的应力、应变和变形云图,其最大应力值为10.305 MPa、最大应变值为0.051 527 mm/m、最大变形量为0.010 946 mm,且最大强度、刚度以及变形均在安全范围内,验证了铣削主轴满足设计要求。设计的自动换刀加工中心结构简单,能一次完成门窗材两边齐头、端头铣型工序,自动化程度高,效率高。 相似文献
9.
以东北林业大学林业与木工机械工程技术中心设计的数控往复式锯材剖分锯为例,对剖分锯操作-显示面板的人机工程进行分析与研究,阐述了人机工程学在设计数控往复式锯材剖分锯操作-显示面板时的重要性。将人性化设计理念融入到剖分锯的设计中,使操作人员在操作过程中能够感受到设计中的人文关怀。 相似文献
10.
11.
《Scandinavian Journal of Forest Research》2012,27(5):427-435
In Scandinavia, moose (Alces alces L.) sometimes cause severe browsing damage to economically-important pine. Moose-vehicle accidents have spurred construction of fences along roads, and these may interfere with moose migration between summer and winter ranges, or the road alone may be a barrier. If this happens and moose build up along roads, landowners may suffer economically. Therefore, this study investigated whether roads, fences or other factors influence the use of young pine stands by moose. Eighty stands along roads in northern Sweden were evaluated in which individually-browsed branches were counted on 9972 pines. Moose browsing was not significantly related to birch (Betula pendula Roth, B. pubescens Ehrh.) density, nor did it differ between pines (Pinus contorta Douglas or P. sylvestris L.). However, increased pine density, site productivity and proximity to a highway were associated with increased browsing. Further large-scale studies are needed to understand moose habitat selection and the effects of roads. 相似文献
12.
《Scandinavian Journal of Forest Research》2012,27(3):206-217
The root systems of 2-yr-old Picea glauca, Picea mariana and Pinus banksiana seedlings were submitted to various frost temperatures during an artificial frost to induce different levels of root damage. Frost-damaged and control seedlings were placed in a greenhouse under high and low soil moisture regimes. Seedling growth and physiology were evaluated periodically. Seedling survival was reduced when root damage reached levels of 60-80%. Root systems of all three species showed partial to total recovery by the end of the experiment. In general, root freezing damage caused reductions in seedling growth, with these reductions becoming less significant over time. Root damage had little to no effect on black spruce and jack pine seedling physiology, while white spruce CO 2 uptake decreased with increasing root damage. Shoot nitrogen content of all three species decreased slightly with increasing root damage. 相似文献
13.
Contour hedgerows of multipurpose tree species in the sloping tea lands of Sri Lanka are expected to reduce soil erosion and
also add significant amounts of plant nutrients to the soil via periodic prunings. The objective of this experiment was to characterize the biomass decomposition pattern and quantify the
amount of nutrients added through prunings of six tree species (Calliandra calothyrsus, Senna spectabilis, Euphatorium innulifolium, Flemingia congesta, Gliricidia sepium and Tithonia diversifolia) currently being used in hedgerows associated with tea. Withered leaf and stem prunings (50 g) were enclosed in 2-mm litter
bags, placed at 5-cm depth and retrieved after one, three, six, nine and 12 weeks. Loss of initial dry weight, N, P and K
was measured. Single exponential decay function adequately described both dry weight and nutrient loss. Tree species differed
significantly in their rate of breakdown with decomposition constants (k) varying from 0.0299 to 0.2006 week−1 for leaves and from 0.0225 to 0.0633 week−1 for stems. Gliricidia showed the highest k for leaves with the rest in the following descending order: Senna > Tithonia ≥ Euphatorium > Calliandra > Flemingia. A similar pattern was observed for loss of all nutrients with Calliandra and Flemingia always having lower k values than the rest. Although N immobilization was not observed, immobilization of P and K was observed
during the first week of incubation in some species, particularly in stem prunings. Annual biomass of prunings differed significantly
between tree species in the following descending order: Calliandra > Senna > Flemingia > Tithonia > Gliricidia > Euphatorium. Calliandra added the greatest amount of nutrients annually to the soil with Euphatorium adding the least. Calliandra prunings provided the annual total K requirement and 49% of the N requirement of mature tea. However, none of the species
provided more than 5% of the P requirement. It is concluded that among the tree species tested, Calliandra and Flemingia are the most suitable for contour hedgerows in tea plantations of this agroclimatic region because of their higher soil nutrient
enrichment capacity and slower decomposition rates which would minimize leaching losses.
This revised version was published online in June 2006 with corrections to the Cover Date. 相似文献
14.
《Scandinavian Journal of Forest Research》2012,27(2):118-130
The effects of seed weight and seed type on seedling growth of Pinus sylvestris (L.) were studied by seeding individually weighed orchard and stand seed in different mixtures under harsh (direct seeding in field) and optimal (seeding in nursery) conditions. In the nursery experiment an increase in the seed weight from 3 to 7 mg increased the seedling height by 10-27% and total weight by 27-113%, and decreased the height/diameter ratio by 5-6% after 2 yrs. With elimination of seed weight effects, orchard seedlings were 2% taller than stand seedlings in year 2. Without elimination of seed weight effects, orchard seedlings were 7-13% taller. In the field experiment an increase in the seed weight from 3 to 7 mg increased seedling height by 18-65%, stem volume by 81-274% and the number of top-buds by 23-34% in year 5. After elimination of seed weight effects, orchard seedlings were 7-13% taller than stand seedlings and without elimination of seed weight effects 20-21% taller after 5 yrs. Even after elimination of both seed weight and genetic effects orchard seedlings were 3-9% larger than stand seedlings in the field experiment. In conclusion, the influence of seed weight and seed type on growth traits and slenderness is highly significant and the influence seems to be greater in harsh conditions. 相似文献
15.
Steven Maranz Amadou Niang Antoine Kalinganire Djeneba Konaté Bocary Kaya 《Agroforestry Systems》2008,72(3):231-239
Baobab leaves form an important part of the local diet in Sahel countries and elsewhere in Africa. Existing leaf nutritional
data and agroforestry performance information are based solely on Adansonia digitata L., the baobab of continental Africa. The introduction potential of Adansonia species from the center of diversity in Madagascar and from Australia remains untapped. To assess this potential, the mineral
contents and B1 and B2 vitamin levels of dried baobab leaves were determined for five-year old trees of A. digitata, A. gibbosa (A. Cunn.) Guymer ex D. Baum, A. rubrostipa Jum. & H. Perrier (syn. A. fony Baill.), A. perrieri Capuron and A. za Baill. grown in an introduction trial in Mali. Nutritional data were evaluated against survival and vigor to identify promising
germplasm. Leaf vitamin and crude protein contents were highest in the Madagascar species, especially A. rubrostipa (B1 88 mg 100 g−1, B2 187 mg 100 g−1, protein 20.7% dry weight). However, the local species far outperformed the introductions in survival, tree height, basal
diameter and resistance to termites. We suggest grafting as a way of harnessing the vigor of well-adapted local baobab varieties
to the superior nutritional profiles of A. rubrostipa and others. Cross-species grafting tests in Adansonia were successful, thus creating new agroforestry possibilities with different scion/rootstock combinations. 相似文献
16.
《Wood material science & engineering》2013,8(2):76-84
Abstract Wood in general and wooden studs in particular are often distorted owing to uneven shrinkage during the drying process in the sawmill. Twist is often the most detrimental of all types of distortion, and it is caused by spiral grain in combination with variations in moisture content. For sawmills, the objective is to produce dried, straight boards, and one method of dealing with boards with excessive spiral grain is to sort them out and then dry them in a pretwisted position to obtain straight boards after drying. A model using the finite element (FE) method for the simulation of drying twist distortions was first calibrated against laboratory experiments in which boards were dried with and without restraints and pretwists. After the calibration, the FE results were compared with industrial test results for boards that were dried without restraints or with restraints with zero pretwist, i.e. straight restraints. The FE model used an elastic–ideally plastic material model to obtain permanent deformations. The calibration was to set the yield stresses so that there was a good match between FE results and results from the laboratory experiments. The comparison between the industrial test results and the FE results showed that the FE model is capable of realistic simulations of drying boards with and without restraints and presumably also pretwists. 相似文献
17.
Astra Zaluma Lauma Bruna Darta Klavina Natalija Burnevica Kristine Kenigsvalde Andis Lazdins Talis Gaitnieks 《Forest Pathology》2019,49(6)
Heterobasidion parviporum and Heterobasidion annosum are widely distributed root‐rot fungi that infect conifers throughout Europe. Infection of conifer stumps by spores of these pathogens can be controlled by treating fresh stumps with a competing non‐pathogenic fungus, Phlebiopsis gigantea. In this study, growth of three Latvian strains of P. gigantea and the biological control agent ‘Rotstop’ strain was evaluated in stem pieces of Norway spruce, Scots pine, lodgepole pine, Douglas‐fir, Weymouth pine, Siberian larch and Sitka spruce. The growth rates of one H. parviporum and one H. annosum isolate were also measured in the same stem pieces. The growth rate of P. gigantea varied greatly in wood of different conifer species. It was higher in the three pine species, lower in Norway spruce and lowest in Sitka spruce and Siberian larch, and in Douglas‐fir, this fungus did not grow. The largest area of wood occupied by P. gigantea was in lodgepole pine. Growth of Latvian isolates of P. gigantea in the wood of Pinus and Picea species was comparable to that of the Rotstop isolate. Consequently, stump treatment with local P. gigantea isolates should be recommended. However, our results suggest that Douglas‐fir stump treatment against Heterobasidion by P. gigantea may be ineffective and other stump treatment methods should be considered. 相似文献
18.
《Scandinavian Journal of Forest Research》2012,27(1):53-61
This study investigated the stand structure in pine, spruce and deciduous forests in the border district of Finland and Russia. A total of 46 mature forest stands was selected as pairs, the members of each pair being as similar as possible with respect to their forest site type, age, moisture and topography. The stands were then compared between the two countries by means of basal areas and number of stems. The proportions of dominating tree species were 2-12% lower, and correspondingly the proportions of secondary tree species higher, in Russian forests. The density of the forest stock was also higher in each forest type in Russia. The forests in the two countries differed most radically in terms of the abundance of dead trees. The amount was two to four times higher in Russian deciduous and spruce forests, and in pine forests the difference was 10-fold. The stand structures indicated that Russian coniferous stands, in particular, were more heterogeneous than intensively managed pine and spruce stands in Finland. 相似文献
19.
《Scandinavian Journal of Forest Research》2012,27(1):15-27
The root collar diameter and the height:diameter ratio are of particular importance in container-grown seedlings where a high density in the containers may produce spindly seedlings. Temperature regimes and light quality are known to affect plant growth. The aim of this study was to identify responses in Picea abies (L.) Karst. seedlings grown with light providing different red:far-red ratios and under temperature regimes with alternating day (DT) and night temperature (NT) from negative (DT < NT) to positive (DT > NT) difference (DIF) between DT and NT. Experiments were conducted in controlled environment chambers and in a daylight phytotron. Only limited thermoperiodic responses appeared in P . abies seedlings with respect to seedling height and dry weight accumulation. The formation of terminal buds, however, was clearly delayed in seedlings grown at negative DIF. The results indicate a requirement for day extension light that is high in far-red, to prevent terminal bud formation under natural short-day conditions. An extended study should be conducted to clarify the minimum level of light intensity and the optimal light quality needed to prevent terminal bud formation under natural short-day conditions. 相似文献
20.
本文分析了CAD在设计中引起的正面和负面影响,并进行了系统的阐述,从而使设计者在应用中能够保持客观的态度。 相似文献