Cultivation effects on soil texture and fertility in an arid desert region of northwestern China     

Mingzhu HE 《干旱区科学》2020,12(4):701-715

In arid desert regions of northwestern China, reclamation and subsequent irrigated cultivation have become effective ways to prevent desertification, expand arable croplands, and develop sustainable agricultural production. Improvement in soil texture and fertility is crucial to high soil quality and stable crop yield. However, knowledge on the long-term effects of the conversion of desert lands into arable croplands is very limited. To address this problem, we conducted this study in an arid desert region of northwestern China to understand the changes in soil physical-chemical properties after 0, 2, 5, 10, 17, and 24 years of cultivation. Our results showed that silt and clay contents at the 17-year-old sites increased 17.5 and 152.3 folds, respectively, compared with that at the 0-year-old sites. The soil aggregate size fraction and its stability exhibited an exponential growth trend with increasing cultivation ages, but no significant change was found for the proportion of soil macroaggregates (>5.00 mm) during the 17 years of cultivation. The soil organic carbon (SOC) content at the 24-year-old sites was 6.86 g/kg and increased 8.8 folds compared with that at the 0-year-old sites. The total (or available) nitrogen, phosphorus, and potassium contents showed significant increasing trends and reached higher values after 17 (or 24) years of cultivation. Changes in soil physical-chemical properties successively experienced slow, rapid, and stable development stages, but some key properties (such as soil aggregate stability and SOC) were still too low to meet the sustainable agricultural production. The results of this long-term study indicated that reasonable agricultural management, such as expanding no-tillage land area, returning straw to the fields, applying organic fertilizer, reducing chemical fertilizer application, and carrying out soil testing for formula fertilization, is urgently needed in arid desert regions.  相似文献   

小麦光腥黑粉菌转化子最适固体培养基的筛选     

李丹丹  何婷  王梦可  刘太国  刘博  陈万权  玄元虎  高利 《植物保护》2020,46(6):164-169

为了筛选小麦光腥黑粉菌转化子最适培养基, 以提高小麦光腥黑粉菌转化子生长速度, 选取了3个菌落形态不同的转化子(ZHZ-1, ZHZ-2, ZHZ-3)进行培养试验?用6 mm打孔器打取菌饼, 将菌饼置于9种培养基上16℃避光培养?观察?测量小麦光腥黑粉菌转化子的菌丝生长情况?菌落直径等主要指标, 结果表明, 9种培养基中, 3种转化子都是在完全培养基(complete medium, CM)上生长状况最好, 菌丝生长速度最快?ZHZ-1转化子在CM培养基上菌落圆形, 有褶皱, 产生大量白色菌丝, 生长速度快?ZHZ-2转化子菌落圆形, 产生大量白色菌丝, 生长速度快?ZHZ-3转化子菌落云纹状, 有褶皱, 产生大量白色菌丝, 生长速度快?  相似文献   

造林密度对三倍体白杨杂种无性系胸径和树皮厚度的影响     

吴剑  周晴  宋连君  康向阳  张平冬 《西北林学院学报》2020,35(2):79-86

三倍体杨树具有突出的营养生长优势,研究造林密度对三倍体毛白杨杂种无性系径向生长的影响规律,可为三倍体毛白杨工业用材林营建和经营管理提供理论指导。以定植于河北威县的11年生三倍体白杨杂种无性系（B301、B331和S86）以及二倍体毛白杨对照无性系1316密度试验林为研究对象,研究造林密度（2 490、1 665、1 110、825、615、495株/hm²和405株/hm²）对三倍体白杨杂种无性系胸径和树皮厚度的影响。结果表明,造林密度和无性系以及造林密度与无性系间的交互效应均对三倍体白杨杂种无性系的胸径生长具有极显著的影响,以495株/hm²造林密度条件下三倍体白杨杂种无性系S86的胸径生长量最大,平均胸径达25.1 cm;三倍体白杨杂种无性系B301、S86的胸径生长量显著大于无性系B331和二倍体对照毛白杨无性系1316;无性系对11年生三倍体白杨杂种无性系的树皮厚度具有极显著的影响,造林密度对11年生三倍体白杨杂种无性系的树皮厚度具有显著的影响。三倍体白杨杂种无性系B301、B331、S86以及二倍体对照毛白杨无性系1316内部个体间胸径与树皮厚度均呈现正相关,说明树皮厚度随着胸径生长量的增大而增厚。研究结果对于认识造林密度对杨树径向生长的影响和指导三倍体白杨良种无性系的推广具有重要意义。  相似文献   

小径木梯形板锯刨机结构设计与研究     

马岩  王刚  宋文龙  杨春梅  曲文  蒋婷  缪骞 《西北林学院学报》2020,35(2):266-272

针对目前市面上加工小径木的机器加工精度低、效率不高、出材率低等问题,分析提高小径木梯形板出材率、加工效率及加工精度的设计方法,通过新的设计方法制定了新的加工工艺。结合工艺分析设计了小径木梯形板锯刨机的总体结构,可以对小径木梯形板进行锯切、粗刨、精刨加工。在对其核心组件锯切组件与刨削组件的加工原理进行分析的基础上,设计了锯切组件结构与刨削组件结构。通过导入锯切主轴SolidWorks的三维模型,利用ANSYS对其锯切主轴进行静力学分析,得到锯切主轴的应力、应变和变形云图,其中最大应力值为7.435 MPa、最大应变值为0.042 316 mm/m、最大变形量为0.002 178 8 mm,其强度、刚度及变形量均在许用范围内,仿真验证了锯切主轴的设计的合理性。  相似文献   

定苗时间对峦大杉1年生苗木生长的影响     

欧建德  康永武 《中国农学通报》2020,36(34):20-24

探究定苗时间对峦大杉苗期生长动态与生长节律影响,优化定苗时间,为育苗提供理论与技术支持。以当年生峦大杉幼苗为试验材料,开展不同定苗时间试验,采用定株观测并应用Logistic方程拟合生长动态的方法,分析定苗时间对苗木生长动态和生长节律的影响效应。研究结果表明,定苗时间影响苗高地径生长效应随处理时间推移而显现,是个动态过程。Logistic方程能够很好地拟合峦大杉苗木生长。定苗时间显著影响苗高、地径线性生长速率、最大线性生长速率和线性生长量,但对苗高地径线性生长始期、终期、线性生长持续期无显著性影响;苗高生长初期定苗较其他处理显著提高苗高和地径的线性生长量线性生长速率、最大线性生长速率,建议增加速生期的养分和水分供给以提高苗木质量。峦大杉合理定苗时间是苗高生长初期（6月30日）。  相似文献   

油松侧枝的节间特征及其变异规律     

张嵩 《温带林业研究》2021,4(1)

【目的】为阐明油松侧枝的节间特征及其变异规律,了解当年生节间枝条和针叶的异速生长关系,揭示侧枝空间构型、活力和光合产物分配的主要影响因子。【方法】本研究在35 a生油松林内选取了5株标准木的标准枝,通过枝条解析截取了372个节间,采用统计分析和模型模拟等方法对相关问题进行了研究。【结果】结果表明:油松枝条多分为3级,近90%的节间分布在2级和3级枝,直径生长周期为1~4 a、具有针叶着生和光合功能的节间占节间总数的83%;节间直径和长度均随枝级增加而显著下降,均随节间生长周期(或形成时间)的增加而显著增加,后者在枝级间及枝级内的变异均远高于前者,后者受枝级和着生位置光照环境的影响明显高于前者。全枝70%以上的枝条生物量分布在1级枝节间,80%以上的针叶分布在2级和3级枝节间;1级和2级枝的生物量以枝条为主,3级枝以针叶为主。直径生长周期为1~3 a的节间生物量以叶为主,4 a的以枝条为主,4 a以上的以完全以枝条为主。当年生节间的不同特征变量间均成显著的异速生长关系,而非成比例变化。【结论】节间是侧枝的基本单元,其数量、质量、生长发育及其在不同枝级和形成时间的变异,以及其主要构件的异速生长关系是影响侧枝空间构型、活力和光合产物分配的主要因子。  相似文献   

Fatigue property of high-performance polyethylene netting twine   总被引：1，自引：0，他引：1  

WORAWIT  WANCHANA  HARUYUKI  KANEHIRO  HIROSHI  INADA 《Fisheries Science》2002,68(2):371-379

Tensile and knot fatigue property of high-performance polyethylene (HPPE), regular polyethylene (PE), nylon multifilament (PAmu), and nylon monofilament (PAmo) under cyclic loading conditions were investigated. The durability of HPPE under tensile fatigue testing was largest, followed by PAmo, PAmu and PE. In knot fatigue, the largest was PAmo, followed by HPPE, PAmu, and PE. High resistance by HPPE to the cyclic loads was also confirmed by scanning electron microscopy, which showed that HPPE suffered the least damage from abrasion compared with the other twines. From the measurement of elongation changes during the cyclic loading, HPPE had very small changes. The low elongation value of HPPE was probably the result of its better fatigue property because there was less damage from abrasion.  相似文献   

Determining reference values for stem water potential and maximum daily trunk shrinkage in young apple trees based on plant responses to water deficit   总被引：1，自引：0，他引：1  

Tom De Swaef  Kathy Steppe  Raoul Lemeur 《Agricultural Water Management》2009,96(4):541-550

The use of plant water status indicators such as midday stem water potential (Ψ_stem) and maximum daily trunk shrinkage (MDS) in irrigation scheduling requires the definition of a reference or threshold value, beyond which irrigation is necessary. These reference values are generally obtained by comparing the seasonal variation of plant water status with the environmental conditions under non-limiting soil water availability. In the present study an alternative approach is presented based on the plant’s response to water deficit. A drought experiment was carried out on two apple cultivars (Malus domestica Borkh. ‘Mutsu’ and ‘Cox Orange’) in which both indicators (Ψ_stem and MDS) were related to several plant physiological responses. Sap flow rates, maximum net photosynthesis rates and daily radial stem growth (DRSG) (derived from continuous stem diameter variation measurements) were considered in the assessment of the approach. Depending on the chosen plant response in relationship with Ψ_stem or MDS, the obtained reference values varied between −1.04 and −1.46 MPa for Ψ_stem and between 0.17 and 0.28 mm for MDS. In both cultivars, the approach based on maximum photosynthesis rates resulted in less negative Ψ_stem values and smaller MDS values, compared to the approaches with sap flow and daily radial stem growth. In the well-irrigated apple trees, day-to-day variations in midday Ψ_stem and MDS were related to the evaporative demand. These variations were more substantial for MDS than for midday Ψ_stem.  相似文献   

基于计算机视觉的葡萄茎直径高精度测量方法   总被引：1，自引：0，他引：1  

曾庆兵  刘成良  苗玉彬  王世平  黄丹枫 《农业机械学报》2009,40(12):182-185

提出了基于计算机视觉的葡萄茎直径测量方法,采用双边滤波降低图像噪声,通过Otsu阈值分割和BloB分析实现葡萄茎与背景的分离,应用基于特征点的定位方法得到茎直径测量位置,由茎直径所包含像素数和尺寸当量计算出茎直径值,从而实现茎直径连续测量.实验和现场应用表明,系统测量重复精度可达±0.5μm.  相似文献   

潜水泵扩张式喷嘴排液装置的优化设计与试验     

朱荣生  李继忠  刘铭媛  燕浩  苏保稳 《排灌机械》2009,27(4):220-223

针对泄漏液体严重危及潜水泵安全的问题,在原非扩张式喷嘴排液装置的基础上,优化设计了一种具有扩张式喷嘴的在线排液装置.为了比较分别具有扩张式和非扩张式喷嘴的排液装置性能的优劣,设计了这两种形式的喷嘴,并设计了4种不同尺寸喉嘴距及6种不同尺寸混合管直径的排液装置;对各种不同的排液装置在同一试验台上分别进行了试验.试验结果表明,当排液装置的扬程为6 m时,具有扩张式喷嘴的排液装置具有更好的排液性能,其最佳工作压力为0.3 MPa,最佳喉嘴距为1.67倍喷嘴喉部直径之长度,最佳混合管直径为2倍喷嘴喉部直径.与非扩张式喷嘴排液装置相比较,具有最佳尺寸的扩张式喷嘴排液装置可以更好地解决潜水泵液体泄漏问题.  相似文献